Setting Up Your IsatPhone 2 to work with ExtremeTrackPro

So you've activated ExtremeTrackPro service for your Inmarsat IsatPhone 2 satellite phone, and now you need to set up your phone to work on the portal and start tracking.  Before setting up the Inmarsat device it is important that you have already received a welcome email with your username and password for www.extremetrackpro.com and that you are able to login in.  If you have not yet received that email please check your junk email and bulk email folders to see if it landed there.  If you still cannot find it please it contact [e-mail]. 

Configure the Inmarsat IsatPhone 2 device:

• Configure Tracking Status
  • The Tracking feature has three states - Enabled, Disabled and Always-on - that control access to the sending of tracking messages. To configure the status, go to the main menu and choose Location services > Tracking > Configure tracking > Tracking status. Then choose a state:
    • Enabled: allows you to start and stop sending tracking messages, either by navigating the menu or by using the Tracking button [graphic] above the volume up/ down keys on the side of the handset
    • Disabled: removes the ability to start or stop the transmission of tracking messages
    • Always-on: The handset continues to send messages whenever it is connected to the network
• Set Up the Tracking Message Recipient
  • Create a contact entry in the phonebook as follows:
    • Select Options > Add to contacts > Create new contact.
    • Contact Email Address: [e-mail]
  • Select that contact as messaging recipient as follows:
    • Select Location services > Tracking > Configure tracking > Edit recipient.
    • Choose the contact you created as the recipient of all message types.
• Choose the Message Interval (For Always-on Mode)
  • Important! - You are charged and SMS fee per message so please check your plan details and consider the cost when setting a message interval.
  • The default interval is set to every 15 minutes.
  • To change the interval, select Configure tracking > Edit interval.
  • The screen displays preset time intervals. Highlight an interval value and press Select.
  • You can also specify your own interval of up to 9999 minutes by choosing Custom interval from the list of intervals. A blank text box is displayed. Type the interval that you want to use and press OK.

Now your IsatPhone 2 is configured and ready to work with ExtremeTrackPro

Back to SatPhoneStore